Máy Lạnh Mitsubishi Heavy FDT40VF/SRC40ZMX-S Inverter 2.0 HP
Belongs to a super high-class ceiling-mounted air conditioner - Hyper inverter (Hi - COP). Using the inverter system to save electricity, inverter and the R410A Refrigerant line are environmentally safe. Moreover, this product line has many modern designs that bring the most comfort and convenience for users.
Independent air reversal control system: Depending on the room temperature, the airflow is independently controlled in 4 directions by a separate wing swing control system.
Flap control: The flaps can be independently controlled from high to low.
CÁC CHỨC NĂNG CỦA MÁY LẠNH MITSUBISHI HEAVY FDT40VF/SRC40ZMX-S Inverter 2.0 HP
|Automatic interpolation mode
Automatically selects operating mode and set temperature based on the inverter's interpolation algorithm.
Automatically selects the operating mode (Cool, Heating, Dry) according to room temperature at the time of setting.
|Air reversal function|
|Auto swing mode
Automatically selects the blow angle to maximize cooling.
|Mode to remember the position of the island
When the spoiler rotates, you can choose any of them stop position. When restarting the machine, the machine will remember the position of the flap from the previous operation.
|Angle of swing up / down
Select an angle according to the desired width.
Máy Lạnh Mitsubishi Heavy FDT40VF/SRC40ZMX-S Inverter 2.0 HP giúp làm giảm độ ẩm bằng cách kiểm soát gián đoạn chu kì làm lạnh.
|Shutdown timer mode
The machine will automatically turn off according to the set time.
Room temperature is automatically controlled during set time to ensure the room temperature is not too cold or too hot.
|24-hour on / off timer
By combining 2 on / off timers, you can set both good times for 1 day. With one time setting the timer will turn on or off the system at a specified time repeated daily.
|Timed start mode
Time to start the machine automatically. The machine can start up early compared to set time to help the desired room temperature when starting to use (cooling mode).
|Automatic error and maintenance function|
|Thaw mode by microprocessor circuit
This mode helps to defrost itself and minimizes over-operation of the machine.
|Function automatic error when there is a problem
In the event of a machine failure, the microprocessor will automatically diagnose and report the error. (Please contact the customer service for inspection and repair).
Use the On / Off button (on the indoor unit body) when the remote control cannot be used.
In cases of sudden power shutdown, the machine will automatically activate when there is power and operate in the mode before the power was turned off.